How To Fix Thumb Drive Not Recognized

If you insert a thumb drive and it’s not recognized in Windows, there are a few things you can try to get it to show up in My Computer. Thumb drives, or flash drives, are USB devices that should be automatically recognized by Windows when you insert it. There could be conflicts or partition issues that prevent it from showing up or being used to store data. Follow these steps to troubleshoot a thumb drive not recognized in your computer.

Troubleshooting Thumb drives

If you insert your thumb drive and nothing happens, follow these steps to try and correct the problem:

* Go to Start and right-click My Computer (or Computer) and select Manage. Under Disk Management, locate your thumb drive, right click and choose change drive letter. If it already has a drive letter, try assigning it a different one, as it could be trying to use a drive letter that’s already assigned to another device.

* If that doesn’t work, try rebooting the computer with the thumb drive still inserted in the USB port and see if that helps.
* Try other USB ports, or try unplugging other USB devices that might be interfering with it.
* Under Disk Management again, confirm the thumb drive is partitioned and formatted. If not, right-click the drive and proceed to format it. Note: all data will be erased from the drive.

To prevent accidental damage of your thumb drive, be sure to remove it correctly from your computer after each use. If an external drive is connected to your computer, you should see a Safely Remove Hardware icon in the system try by your clock. Before removing a USB thumb drive, click that icon and find your drive in the list and choose “remove.” It will display a message stating when the device has been stopped. You can also open My Computer and right-click the drive and then select “Eject.”

Thumb drives are fragile and quite unreliable. It may be possible it has completely failed. Be sure to use thumb drives only as temporary storage and also try and keep backups of any data you store on removable drives.

Read More

Solusi Error E16 Canon MP258

Indicator:
Error E16 Canon MP258 or show this pict :

Solusi:

Read More

How To Service Epson R210 / R230 Ink and Resume Led Blinking Rapidly

Discussion this time is about the Epson R210 and R230 printers that the Resume and Ink Led blinking rapidly. This damage often occurs, and hopefully with this article easier for you all ....

How To Service Epson R210 / R230 Ink and Resume Led Blinking Rapidly :

Early indications:

When the printer is turned on, the printer will look normal and do the calibration with head movement to the right and left on a regular basis. But at the end of the printer calibration, printer process stopped completely with ink indicator led and resume led (which the paper symbol) flashing blinking rapidly.

Cause:

Epson R210 / R230 Ink and Resume Led Blinking Rapidly, this is caused by the closing of the sensor under the head by the ink overflow, and eventually the printer will protect themselves by stop completely.

Service Solutions Epson R210 / R230 Ink and Resume Led Blinking Rapidly :

1. Open the case Epson R210 / R230.

2. Take Head printer and see the bottom, there you will find a small sensor which is normally closed / submerged ink.

3. Clean this sensor.

4. If the problem still the same, Ink and Resume Led R210 / R230 still blinking fast, then you should replace the sensor and cable.

5. Completed and the printer is ready to try .....

Good luck .....

Read More