Why Computer Makes Weird Noises

If your computer makes weird noises, then you’re having a hardware issue of some type, which means you’ll probably need to open the case to determine what’s causing the noise. There are only a few components in the computer that move, so unless the noise is a beep, then there is likely an issue with a drive or a fan. If you are not comfortable opening the computer case while the computer is running, be sure to take it to a computer repair shop so they can help find the cause.

Noises From Inside The Computer

The components that can generate noise in the PC are the fans (there could be several), CD or DVD drive, Floppy drive, hard drive and power supply. You should start by ejecting any disks that might be inside of any of the drives, such as the floppy, Zip drive or CD drive. If there are no disks, and no activity lights on those devices, then it is likely one of the following:

CPU FAN NOISES


You have at least one, but probably as many as three or four fans inside of your computer. You are guaranteed to have a fan in the Power supply. The power supply is at the back of the computer and has an exhaust fan. Some power supplies have another fan inside that draws air upward from the CPU so the exhaust fan can pull the heat out of the case.

You probably also have a fan on the CPU. The CPU fan will rest atop a metal heat sink. This fan is responsible for pulling the heat away from the CPU to keep it cool.

There could be intake fans in the front of the case and exhaust fans going out the back.

There could also be a fan on the video card GPU, which is similar to the CPU fan, but smaller.

A couple of things can happen with fans. They can simply be dirty and need to be blown out with compressed air. Or the bearings in them are starting to fail. If it is the latter, you will need to replace the fan. If the case is open, you can usually quickly pinpoint the fan that is causing the issue. If compressed air does not fix a noisy power supply fan, replace the entire power supply immediately.

Noises From The Power Supply

The power supply can have a couple of noises. It could have a bad or dirty fan as described above, or it can be making an electrical humming noise. If blowing the fan out does not help, or if you do hear the electrical hum, unplug the computer and replace the power supply immediately.

Noises From The Hard Drive

It’s not unusual for the hard drive to churn and hum as it works. If you notice loud noises above that, a few things can be happening. There could be physical defects on the platters, causing the high-speed head to bounce. It could have a bad actuator arm or read / write head. Both of these necessitate an immediate replacement of the drive. Or it could just be struggling to read and write due to a lack of space or maintenance. Check the remaining capacity and remove anything you can if the space is low. Then defrag the drive by going to Start>All Programs>Accessories>System Tools>Drive Defragmenter.

You might also want to run the Disk Checking Utility. This will scan for physical defects on the drive and mark them as non-usable. To do this, right-click the C Drive in My Computer and select Properties. Under the Tools tab, click the Check Now button and have it scan and fix any errors it finds.

In conclusion, the power supply is not serviceable. Any noise coming from there is bad news and the power supply should be replace. All other fans–even the video card fan–can be replaced, if necessary. If the hard drive is making noises, back up all data, remove what you can and run the disk defragmenter and disk checking utility.

Read More

How To Fix Your Printer

If this is a new cartridge, open the front cover and remove all cartridges. Be sure the protective film has been removed from the cartridge prior to installation. Inspect the contacts on the new cartridge for damage. Replace the cartridges in the correct place, close the front cover and power the printer down and then up again.

Printer Cannot Be Installed

If you’re trying to install a printer and it will not install, be sure to check the Device Manager in the Control Panel for any Unknown Devices. Your printer will be come an Unknown Device if you plug the cable in before installing the driver software. Remove the Unknown Device and then unplug the USB cable. Next, install the software that came with the printer, and when finished, plug the USB cable back in.

Printer Streaks

If your printer is producing a streaked image, you will need to clean the printer heads. To do this, go to Printers in the Control Panel, then right click your Printer then select Properties. A menu with the various settings will appear. You need to select Clean Printer Cartridges. The printer will run in cleaning mode.

Printer Does Not Print Jobs

When you click Print and nothing happens, you may be sending jobs to a printer that is not connected to your computer. For example, if another printer was previously installed, and you install a new printer, the old printer might still be setup as the Default Printer. Go into the Control Panel, then Printers and make sure the new printer is set to Default.

Printer Jams Frequently

If your printer jams frequently, you may be loading too much paper. This can also occur if you’ve had jams in the past and have a piece of debris still stuck in the printer. Use a flashlight to examine the entire mechanism to ensure no paper is still inside. This can also happen if an internal gear is damaged. You will often notice one side being fed faster than the other. This could me the printer is physically damaged and needs to be replaced or repaired.

Read More